Illinois Railway Museum Home Page
 BLOG | DIRECTIONS | SCHEDULE | STORE |
   
 
 Passenger-Car-Blog-Posts 
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
The handle is now affixed and the door from the Birmingham to the Pacific Peak is complete - Photo by Michael McCraren
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Pullman Standard door with window in place - Photo by Michael McCraren
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Ray secures the glass in place - Photo by Michael McCraren
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Ray and Mark set the rubber to hold the window - Photo by Michael McCraren
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Ray Mormann and Mark Gellman prepare the door window opening - Photo by Michael McCraren
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
The handle is now affixed and the door from the Birmingham to the Pacific Peak is complete - Photo by Michael McCraren - Pauline Trabert (trabert)
Viewed: 6 times.
Pullman Standard door with window in place - Photo by Michael McCraren - Pauline Trabert (trabert)
Viewed: 6 times.
Ray secures the glass in place - Photo by Michael McCraren - Pauline Trabert (trabert)
Viewed: 6 times.
Ray and Mark set the rubber to hold the window - Photo by Michael McCraren - Pauline Trabert (trabert)
Viewed: 4 times.
Ray Mormann and Mark Gellman prepare the door window opening - Photo by Michael McCraren - Pauline Trabert (trabert)
Viewed: 4 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Ray doing step repair - Photo by Michael McCraren
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
A step in need of repair - Photo by Michael McCraren
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Thanks to the track department for use of the air compressor - Photo by Michael McCraren
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Foam sealant was applied to seal the edges of the patch- Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
The last 1630 revenue run of the day - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
Ray doing step repair - Photo by Michael McCraren - Pauline Trabert (trabert)
Viewed: 5 times.
A step in need of repair - Photo by Michael McCraren - Pauline Trabert (trabert)
Viewed: 5 times.
Thanks to the track department for use of the air compressor - Photo by Michael McCraren - Pauline Trabert (trabert)
Viewed: 7 times.
Foam sealant was applied to seal the edges of the patch- Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 11 times.
The last 1630 revenue run of the day - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 11 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Door fully reassembled and reinstalled to be painted later - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Sealant bead applied to entire edge of door frame - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Original insulation material replaced inside the door frame - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
A quarter turn past the mark and the air brake hoses are ready - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Hose and fittings tightened and marked - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
Door fully reassembled and reinstalled to be painted later - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 14 times.
Sealant bead applied to entire edge of door frame - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 10 times.
Original insulation material replaced inside the door frame - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 15 times.
A quarter turn past the mark and the air brake hoses are ready - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 12 times.
Hose and fittings tightened and marked - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 16 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
New air brake hose fittings secured - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
New air brake hose applied - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Drilling holes that didn't line up properly - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Test assembly of door cover to frame - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Wire wheel polish of external surface - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
New air brake hose fittings secured - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 13 times.
New air brake hose applied - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 11 times.
Drilling holes that didn't line up properly - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 10 times.
Test assembly of door cover to frame - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 10 times.
Wire wheel polish of external surface - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 10 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Deburring the screw holes - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Countersinking the screw holes - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Next a Skill saw was used to cut out the key hole and door knob holes - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Chuck drilling and tapping holes for the new door face - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
A lot of activity was happening at the diesel barn in preparation for Diesel Days - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
Deburring the screw holes - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 9 times.
Countersinking the screw holes - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 10 times.
Next a Skill saw was used to cut out the key hole and door knob holes - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 13 times.
Chuck drilling and tapping holes for the new door face - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 13 times.
A lot of activity was happening at the diesel barn in preparation for Diesel Days - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 9 times.
Powered by Gallery.
Copyright © 1995-2014, Illinois Railway Museum. All rights reserved. Last Modified: 05/11/10 11:20:24 PM