| | | |
|
|
|
|
|
Wear on the valve cylinder - Nigel Bennett (nbennett) Viewed: 1457 times.
|
Mount for the boring bar - Nigel Bennett (nbennett) Viewed: 1429 times.
|
The boring bar is carefully loaded into the mounts on the cylinder - Nigel Bennett (nbennett) Viewed: 1539 times.
|
At the rear of the cylinder the boring bar now projects from the mount - Nigel Bennett (nbennett) Viewed: 1354 times.
|
| | | |
| | | |
|
|
|
|
|
With the gear train and motor mounted boring is in progress - Nigel Bennett (nbennett) Viewed: 1490 times.
|
Valve cylinder rebored - Nigel Bennett (nbennett) Viewed: 1451 times.
|
The shoe is in the furnace and Jason adjusts the mold within it - Nigel Bennett (nbennett) Viewed: 1457 times.
|
The mold is in place to make the U shaped center of the bearing - Nigel Bennett (nbennett) Viewed: 1493 times.
|
| | | |
| | | |
|
|
|
|
|
Melting the babbitt - Nigel Bennett (nbennett) Viewed: 1527 times.
|
Jason fluxes the shoe to make the Babbitt adhere - Nigel Bennett (nbennett) Viewed: 1414 times.
|
Pouring the babbitt - Nigel Bennett (nbennett) Viewed: 1484 times.
|
Shoe partly machined in the planer - Nigel Bennett (nbennett) Viewed: 1503 times.
|
| | | |
| | | |
|
|
|
|
|
Spider cleaned for re-assembly - Nigel Bennett (nbennett) Viewed: 1383 times.
|
Tender buffer back in place - Nigel Bennett (nbennett) Viewed: 1421 times.
|
New studs and the hone is in place - Nigel Bennett (nbennett) Viewed: 1511 times.
|
Rig for honing cylinders - Nigel Bennett (nbennett) Viewed: 1443 times.
|
| | | |
| | | |
|
|
|
|
|
Honing the bore - Nigel Bennett (nbennett) Viewed: 1403 times.
|
Machining the valve crosshead - Nigel Bennett (nbennett) Viewed: 1489 times.
|
The valve being assembled - Nigel Bennett (nbennett) Viewed: 1448 times.
|
Complete and reday to install - Nigel Bennett (nbennett) Viewed: 1495 times.
|
| | | |
30
