| | | |
|
|
|
|
|
P1040168.JPG - James Kolanowski (jamesk) Viewed: 1945 times.
|
P1040167.JPG - James Kolanowski (jamesk) Viewed: 1764 times.
|
The next one rolled over to remove pins. - James Kolanowski (jamesk) Viewed: 2051 times.
|
The finished product all mounted, although it'll have to be taken down to prime and paint the back side. - James Kolanowski (jamesk) Viewed: 2218 times.
|
| | | |
| | | |
|
|
|
|
|
The new holes lined right up and slid right on. - James Kolanowski (jamesk) Viewed: 2297 times.
|
New bolts pushed into position. - James Kolanowski (jamesk) Viewed: 1988 times.
|
New holes with the mag drill. - James Kolanowski (jamesk) Viewed: 2199 times.
|
4 new holes, all ready to test fit. - James Kolanowski (jamesk) Viewed: 1833 times.
|
| | | |
| | | |
|
|
|
|
|
Prep work to drill some new holes. - James Kolanowski (jamesk) Viewed: 2161 times.
|
One option of what it could be restored to. - James Kolanowski (jamesk) Viewed: 2081 times.
|
Another option of what it could be restored to. - James Kolanowski (jamesk) Viewed: 2026 times.
|
All the holes welded up and ground smooth. - James Kolanowski (jamesk) Viewed: 2072 times.
|
| | | |
| | | |
|
|
|
|
|
Alco was helping Scott for part of the day. - James Kolanowski (jamesk) Viewed: 2083 times.
|
Looks like it never had holes in the casting. - James Kolanowski (jamesk) Viewed: 1982 times.
|
Another hole welded in, on one side, and both ground down to flat. - James Kolanowski (jamesk) Viewed: 2040 times.
|
Coupler pad cleaned and painted. - James Kolanowski (jamesk) Viewed: 3753 times.
|
| | | |
| | | |
|
|
|
|
|
The other coupler pad cleaned and painted. - James Kolanowski (jamesk) Viewed: 2327 times.
|
P1020978.JPG - James Kolanowski (jamesk) Viewed: 1972 times.
|
P1020977.JPG - James Kolanowski (jamesk) Viewed: 2103 times.
|
P1020976.JPG - James Kolanowski (jamesk) Viewed: 1926 times.
|
| | | |
2
