Illinois Railway Museum Home Page
 BLOG | DIRECTIONS | SCHEDULE | STORE |
   
 
 Passenger-Car-Blog-Posts 
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Original insulation material replaced inside the door frame - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
A quarter turn past the mark and the air brake hoses are ready - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Hose and fittings tightened and marked - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
New air brake hose fittings secured - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
New air brake hose applied - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
Original insulation material replaced inside the door frame - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 49 times.
A quarter turn past the mark and the air brake hoses are ready - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 46 times.
Hose and fittings tightened and marked - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 50 times.
New air brake hose fittings secured - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 47 times.
New air brake hose applied - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 49 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Drilling holes that didn't line up properly - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Test assembly of door cover to frame - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Wire wheel polish of external surface - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Deburring the screw holes - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Countersinking the screw holes - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
Drilling holes that didn't line up properly - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 53 times.
Test assembly of door cover to frame - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 48 times.
Wire wheel polish of external surface - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 47 times.
Deburring the screw holes - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 49 times.
Countersinking the screw holes - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 51 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Next a Skill saw was used to cut out the key hole and door knob holes - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Chuck drilling and tapping holes for the new door face - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
A lot of activity was happening at the diesel barn in preparation for Diesel Days - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
A good crowd of visitors were waiting for the 1630 boarding call - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Steam and electric trains running on the mainline - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
Next a Skill saw was used to cut out the key hole and door knob holes - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 61 times.
Chuck drilling and tapping holes for the new door face - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 48 times.
A lot of activity was happening at the diesel barn in preparation for Diesel Days - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 30 times.
A good crowd of visitors were waiting for the 1630 boarding call - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 43 times.
Steam and electric trains running on the mainline - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 35 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
The old door cover is used to mark the new holes to be drilled - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
The straight edge is turned to make the vertical cut - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Shelly Vanderschaegen buffing wax in the Ely dining room - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Ever wonder why Shelly Vanderschaegen's knees are dirty? - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Kevin Kriebs removing adhesive on the 1st Exhibit Car - Photo by Michael McCraren
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
The old door cover is used to mark the new holes to be drilled - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 36 times.
The straight edge is turned to make the vertical cut - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 42 times.
Shelly Vanderschaegen buffing wax in the Ely dining room - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 44 times.
Ever wonder why Shelly Vanderschaegen's knees are dirty? - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 34 times.
Kevin Kriebs removing adhesive on the 1st Exhibit Car - Photo by Michael McCraren - Pauline Trabert (trabert)
Viewed: 45 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Chuck uses a straight edge to cut the metal replacement - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Chuck uses the old door face as a template for the replacement cover - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Pauline Trabert applies rust converter to Dyno door - Photo by Shelly Vanderschaegen
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Chuck Trabert vacs loose rust from Dynamometer door frame - Photo by Pauline Trabert
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
The stainless steel patch is in place - Photo by Michael McCraren
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
Chuck uses a straight edge to cut the metal replacement - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 37 times.
Chuck uses the old door face as a template for the replacement cover - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 34 times.
Pauline Trabert applies rust converter to Dyno door - Photo by Shelly Vanderschaegen - Pauline Trabert (trabert)
Viewed: 35 times.
Chuck Trabert vacs loose rust from Dynamometer door frame - Photo by Pauline Trabert - Pauline Trabert (trabert)
Viewed: 30 times.
The stainless steel patch is in place - Photo by Michael McCraren - Pauline Trabert (trabert)
Viewed: 33 times.
Powered by Gallery.
Copyright © 1995-2015, Illinois Railway Museum. All rights reserved. Last Modified: 05/11/10 11:20:24 PM